When did they move the mound back?

We might learn from what happened the last time the mound was moved back. Until 1892, the pitcher’s box — it was not then a raised mound with a rubber, but a box like the batter’s box — ended 50 feet from home plate.2021-05-29

Why are pitching mounds raised?

The elevation on pitcher’s mound was made in order to return some advantages to pitchers that was lost due to extending the pitcher position. By elevating their delivery point, pitchers can gain momentum as they stride down towards the plate.2012-09-11

Did they lower the mound because of Bob Gibson?

Because pitchers, led by Gibson, were so dominant in 1968 that baseball lowered the pitching mound 5 inches and shrank the strike zone. The changes became known as the “Gibson Rules.” Gibson and his uniform number, 45, retired in 1975.2020-10-03

Why is Bob Gibson important?

Gibson’s 1968 season is regarded as one of the finest pitching campaigns in the history of baseball. That year he completed 28 of his 34 starts, led the league in shutouts (13) and strikeouts (268), and had an ERA of 1.12, the lowest single-season ERA since 1914.

How did Bob Gibson change the world?

Sometimes known as the “Gibson rules”, MLB lowered the pitcher’s mound in 1969 from 15 inches (380 mm) to 10 inches (250 mm) and reduced the height of the strike zone from the batter’s armpits to the jersey letters.

Did MLB lower the mound because of Bob Gibson?

Bob Gibson Had Nowhere to Go but Down—But Only Because MLB Lowered the Mound | Bleacher Report | Latest News, Videos and Highlights.

When did they move the pitching mound back?

In 1969, it lowered the mound by five inches after the previous season, the so-called “Year of the Pitcher.” White, cognizant of the mound’s history, points out that the league didn’t test the shorter mound before implementing it in 1969.2021-08-26

Did MLB raise the mound in 1968?

MLB did not make the decision to lower the mound and shrink the strike zone until December 1968—which meant baseball had all summer and fall to toss around suggestions about how to move forward.2021-06-01

When did they change the height of the pitching mound?

In 1893, the pitching distance was changed, and the box was replaced with the pitcher’s rubber. Pitchers discovered that they could get more speed on the ball if they were allowed to stride downhill, so their groundskeepers would provide them with a mound. In 1903, the maximum height was set at 15 inches.2021-08-10

When did Major League baseball lower the height of the pitching mound?

1968

Why did they lower the pitching mound?

The changes were made, according to one wire service, “to add more enjoyment for the fans and more offense in the games which the pitchers dominated in both the National and American leagues this past season.”2019-02-07

What is the Gibson rule?

“He always pitches when the other team doesn’t score any runs.” Because pitchers, led by Gibson, were so dominant in 1968 that baseball lowered the pitching mound 5 inches and shrank the strike zone. The changes became known as the “Gibson Rules.”2020-10-03

Was the mound raised in 1968?

No, it is not time to lower the mound. The last time Major League Baseball did that was 1969, and it was done out of necessity because of what had happened in 1968 — the original, the one and only, Year of the Pitcher.2011-05-17

How much did they lower the mound?

So after the season, MLB officials lowered the mound to 10 inches and shrank the strike zone to its modern size.2019-02-07

What rule did MLB change because of Bob Gibson?

Bob Gibson Had Nowhere to Go but Down—But Only Because MLB Lowered the Mound. Fifth in an 11-part series examining the vagaries of awards voting.

Why was the mound lowered?

How high should a pitchers mound be?

Obtain Proper Distance, Alignment and Height For a high school, college or professional field, the front of the pitcher’s plate (rubber) should measure 60 feet 6 inches from the apex of home plate. The top of the rubber must be 10 inches higher than home plate.

Why was the pitching mound lowered?

And MLB did not leave that up to chance. After ’68, it lowered the pitching mound and shrunk the strike zone for ’69, trying to ensure that this offensive environment would never happen again. Because how could there be another season with a name like the Year of the Pitcher?2021-06-01

Pitcher's Mound & Field Dimensions – UmpireBible

The distance from the front edge of the pitcher’s plate to the rear point of home plate measures 60′-6″. This distance was established in 1893 and has served baseball well for 125 years. The height of the mound, however, has changed – most recently in 1969, when it was lowered to its present height of 10 inches.

Pitcher's mound – BR Bullpen – Baseball-Reference.com

The area of the mound around the pitching rubber is flat. Starting 6 inches in front of the rubber, or 60 feet from home plate, the mound slopes downward at a rate of 1 inch per foot over a span of at least 6 feet. It is very important that the mound be maintained in good condition.

The Ultimate Guide to Pitching Mounds – A Pitching Mound

Usually pitching mound heights are either 6″, 8″ or 10″. 6″ Pitching Mounds – Portable pitching mounds that are 6″ tall are great for player ages 11 and under (11u leagues). 8″ Pitching Mounds – Eight inch portable pitching mounds are popular among youth players ages 12-14.

Baseball Pitcher's Mound Dimensions & Drawings

The Baseball Pitcher’s Mound, also referred to as the hill, is the raised pitching area that is placed at the center of the infield. It is where the Baseball Pitcher pitches the ball towards the batter. The pitcher stands at its center on the pitcher’s rubber. Baseball Pitcher’s Mounds have an overall diameter of 18′ (5.49 m) for an overall area of 254 ft² (23.6 m²).

How to Construct a Pitcher's Mound | Turface Athletics

Always keep the mound covered when not in use. Recommended Equipment and Materials Obtain Proper Distance, Alignment and Height For a high school, college or professional field, the front of the pitcher’s plate (rubber) should measure 60 feet 6 inches from the apex of home plate. The top of the rubber must be 10 inches higher than home plate.

Pitching Mound History–balance between pitchers and batters

All this chicanery was perfectly legal in MLB, prior to 1950, when a rule required all mounds to be the same height—exactly than 15″ above the baseline, no less. With the growing use of relief

Basic Mound Specifications | Turface Athletics

The top of the pitching rubber must be 10 inches above home plate. Build or reduce height of the mound accordingly using Turface® Professional Mound Clay® . If a transit level is not available, drive a stake at the apex of home plate measuring 10 inches high.

READ When was the last time Texas A&M beat Alabama?

Portable Pitching Mound Plans: Step by Step Instructions

To build a standardized mound, the height needs to be 10 inches of which 2 feet is the level section and 6 feet is the slope section. Step 1: First, get your plywood which I am assuming is an 8-foot ply, sliced into a 2 and 6-foot section and 16-foot ply into a 10 foot and 6-foot section.

The Height of the Hill – The Hardball Times

To help the hitters, the pitching mound was lowered from 15 inches to 10, and the strike zone was returned to its 1961 size. The run-scoring environment in 1969 was much greater than it was in

Build a DIY Pitching Mound ️ Step by Step – Culiau

Always measure twice so the DIY pitching mound turns out nice. #3 Rear Of the Mount. Once that is done on each of the 8′ 1×10 you want to take the 6′ 1×10 and you want to cut that down to 4′, which is going to be part of the base of the mound across the rear of the mount. #4 Add the Wheels to the Portable Pitching Mound.

Why Is The Pitcher's Mound Raised? – Baseball Scouter

The pitcher’s mound could not exceed 15 inches in height. (This was reduced to today’s 10 inches after the 1968 season — the “Year of the Pitcher”). However, this rule was loosely enforced until mid-century, and some home stadiums had mounds rumored to be up to 20 inches in height! Mounds would have an official diameter of 18 feet.

Portable Pitching Mound – Best Selection of Pitching Mounds

A 4″ pitching mound is strictly for practice only. When it comes to game usage, the 4″ height does not meet the standard height requirements for little league. We offer a few 4″ high mounds including the Portolite Economy Mound, the Pitch Pro 334, and the ProMounds Training Mound. These mounds are perfect for use in the backyard.

Pitching Mound LL Baseball | Little League

PITCHING PLATE 40″ 16″ 40″ LEVEL AREA 40″ X 17″ 4″ 1″ 1″ 2″ 1″ 3″ 5′ 17″ 18″ 1″ LEVEL AREA 40″ x 17″ REAR SLOPE (2′ 6″) GRADUAL TO CIRCLE EDGE PITCHING PLATE 6″ 5′ 10′ DIAMETER CIRCLE 40″ LEVEL AREA 40″ X 17″ 46′ DISTANCE FROM THE PITCHERS PLATE TO REAR POINT OF HOME PLATE LITTLE LEAGUE BASEBALL® (MAJOR/MINOR) DIVISIONS

Height of a Little League Pitching Mound – SportsRec

The Little League pitching mound height for younger players is 6 inches, with a base path of 60 feet. For older players, around 11 to 13 years old, Little League increased the pitching mound height to 8 inches in 2013, and the base path is 70 feet for its Intermediate Baseball Division. The Height Advantage

USSSA BASEBALL OFFICIAL PORTABLE PITCHING MOUNDS – KC Sports

While this mound can be used for all ages, it is ideal for the transition from machine pitch to kid pitch. It’s designed with the same attention to detail and includes many of the same features as our full size mounds. SPECIFICATIONS: 48″ x 68″ x 6″ Reinforced integral ribbing to prevent deflection Spiked 6″ x 24″ x 1/2″ regulation rubber

Four stats that showed why baseball had to lower the mound

Four stats that showed why baseball had to lower the mound after 1968 4 stats that explain why mound was lowered after ’68. By Michael Clair. December 3, 2015. We live in a pitching-dominated era, with strikeouts on the rise and ERAs dwindling. For those that love low-scoring pitching duels, it’s a dream come true. For others, especially those

Pitching Distances – Pitcher's Mound from Home Plate – The

The pitching distance is the distance from the pitcher’s mound to the front of home plate. Note that this is certainly not the distance from the ball’s release point to the rear point of the plate, which can be several feet shorter depending on the pitcher’s height and method of delivery. The pitching distance varies […]

Baseball Field Dimensions: Ultimate Guide (2019) – Team

The baseball mound is 18 feet in diameter and 10 inches higher than home plate. The pitching rubber is 18 inches back from the center of the mound. The flat area on top of the mound is 5 feet by 34 inches. The 6 inches in front of the pitching rubber is flat, and then begins to grade down one inch per foot.

Game Pitching Mounds – Portable Pitching Mounds

6″ high pitching mounds are regulation height for little leagues. If you are buying a pitching mound for your league’s 12-year-old bracket or younger, you will want to look at the 6″ high pitching mounds. 8″ Pitching Mounds

Usssa Pitching Mound Height – Pitching Tips

It is not necessarily do you good. usssa pitching mound height Let’s switch speed in excess of 90 MPH. They are also designed to throw to warm-up before they advance to ensure the safety of third party story and skills in foul territory. Pitching pitching A baseball as hard and accuracy of around 65 mph from 60 feet.

Top 10 Portable Pitching Mounds of 2021 – Anytime Baseball

Pitching Mound Dimensions: 82″ W x 109″L x 6″ tall; 60 oz. Nylon Green or Clay AstroTurf; 6″ x 24″ White Rubber Pitching Block. (This is removable) Weight: 200 lbs. Bottom Line: Whether you are a coach looking for a game mound or a parent looking for a pitching mound, this is a great option that will last you for many seasons.

Pitching Mound Intermediate Baseball | Little League

pitching plate pitching plate 1″ 1″ 2′ 5′ 12′ diameter circle 50′ distance from the pitchers plate to rear point of home plate little league® intermediate (50/70) baseball division pitching mound layout last updated: 3/2/2018

Pitching Mound Height Affects Throwing Motion, Injury Risk

Pitching Mound Height Affects Throwing Motion, Injury Risk Date: Source: Medical College of Wisconsin Summary: A study involving several Major League Baseball pitchers indicates

Do Mound Height and Pitching Distance Affect Youth

Methods: Twenty-one young (12.6 ± 0.5 years) baseball pitchers pitched 5 full-effort fastballs each from 5 different conditions, in random order: 14.02-, 16.46-, and 18.44-m distances from a 25 cm-high mound, 16.46-m distance from a 15 cm-high mound, and 16.46-m distance from flat ground. Pitching biomechanical values were collected with a 12

NCAA 1-9 Pitcher's Mound – Baseball Rules Academy

Pitcher’s Mound. SECTION 9. a. The top of the pitcher’s rubber must be 10 inches above the top surface of home plate. The 10-inch height can be measured easily by the use of a line level. There should be a gradual slope of 1 inch per foot from a point 6 inches in front of the pitcher’s rubber to a point 6 feet toward home plate.

DIY Portable Pitching Mound Instruction Guide 2022

And just for clarification, a standard pitching mound’s height is 10 feet. Two of these feet are the level section while 6 feet are the slope section. Step 1- Assemble your raw materials and tools for the job. These raw materials include an 8-foot ply wood, ribbed nails, pitcher’s rubber and two small wheels. The tools include a hammer, a

READ When should you start using conditioner on toddler?

Setting the Pitching Rubber – Beacon Athletics

The elevation of the pitching rubber is measured in respect to the elevation of home plate. A mound that is ten inches tall has a pitching rubber surface that is exactly ten inches higher than the surface of home plate. Most infields incorporate a slope in order to facilitate drainage from the infield. This will reduce the height of your soil

10" Tall Adult size portable pitching mound for high

Our largest pitching mound is the 10 inch tall X-Large adult size model. This size is specifically designed for players who need to pitch off of a mound that is 10 inches tall. We offer this version for sale because the pitching rubber on high school pitching mound is 10 inches higher than home plate, and people request a 10 inch tall mound.

How to Build a Pitching Mound in Your Backyard – Dirt

The size of the mound involves the circumference and height, and the location of the pitching rubber on the mound. You also need to know the distance from the mound to home plate, mentioned in step 6. Note that the pitching mound size and distance to home plate will increase as your child gets older. 2. Level the Site

DIY Pitching Mound : 4 Steps (with Pictures) – Instructables

DIY Pitching Mound: My son has outgrown his pitching mound so I decided to build another one. He’s just starting his Freshman year so I know he will still be growing and we will get at least another 4 years out of this one. The mound has to be sturdy and weatherproof. …

Portable Pitching Mound / Construction:

4. To install a pitching rubber on the flat portion of the platform, cut a 1″ x 4″ scrap piece of wood 18″ long, paint white, center and secure with screws. In one afternoon and for @ $125, you have constructed a portable pitching mound which will last for years and enhance the training ability of your pitching staff many fold.

MLB | Pitch Smart | Pitching Guidelines | Ages 9-12 | MLB.com

Focus on learning baseball rules, general techniques, and teamwork. Do not exceed 80 combined innings pitched in any 12 month period. Take at least 4 months off from throwing every year, with at least 2-3 of those months being continuous. Make sure to properly warm up before pitching. Set and follow pitch-count limits and required rest periods.

Pitching Mound LL Baseball | Little League

pitching plate 6″ 5′ 10′ diameter circle 40″ level area 40″ x 17″ 46′ distance from the pitchers plate to rear point of home plate little league baseball® (major/minor) divisions pitching mound layout last updated: 3/2/2018

How to Build a Pitchers Mound (with Pictures) – wikiHow

A regulation pitcher’s mound is a raised section in the middle of a baseball diamond where a pitcher stands to throw a pitch. A pitcher’s mound is typically made of clay, sand, and dirt. Measure the distances carefully to ensure your mound will be to regulation, and avoid falling into the common trap of placing the pitcher’s plate in the

Usssa Pitching Mound Height – Pitching Tips

It is not necessarily do you good. usssa pitching mound height Let’s switch speed in excess of 90 MPH. They are also designed to throw to warm-up before they advance to ensure the safety of third party story and skills in foul territory. Pitching. pitching A baseball as hard and accuracy of around 65 mph from 60 feet.

Selecting the right Portable Pitching Mound for you

The youth mound is 6″ tall and is designed for players 12 and under. The intermediate is 8″ tall because players often begin pitching from that height at 13. That being said after seeing both versions sometimes people with younger kids chose the larger mound or the other way around. Its really personal preference.

Build the Perfect Pitcher's Mound – BrightView

As mentioned previously, a typical pitcher’s mound is 18 feet in diameter with the center of the mound 18 inches in front of the pitching rubber. That makes the measurement from the back of the home plate to the center of the pitcher’s mound 59 feet. Note: Often, the rubber is accidentally placed in the center of the pitcher’s mound.

After 1968's 'Year of the Pitcher,' MLB lowered the mound

Now lowering the mound is again in the news. Citing sources, ESPN reported that MLB “is interested in studying mound height, with the potential for [Commissioner Rob] Manfred to implement a

How high is a Little League pitching mound? – AllStar Mounds

The AllStar #5 Little League Pitching Mound is 82″ W x 109″ L x 6″ tall with a 6″ x 24″ White Rubber Pitching Block (Removable). It comes in green or clay color and weighs 200 lbs. To find out more about AllStar Mounds’ portable pitching mounds, give them a call at 1-800-868-0254 or email them by visiting https://allstarmounds.com

Pitcher's mound | Baseball Wiki | Fandom

The pitcher moves forward off the rubber as the pitch is released. The pitcher’s mound is a low artificial hill found in the center of a baseball diamond. On the mound there is a white rubber slab, called the pitcher’s plate or commonly the rubber, six inches (15 cm) front-to-back and two feet (61 cm) across, the front of which is exactly sixty feet six inches (18.4 m) from the rear point of

Baseball field – Wikipedia

In addition, a higher mound generally favors the pitcher. With the height advantage, the pitcher gains more leverage and can put more downward velocity on the ball, making it more difficult for the batter to strike the ball squarely with the bat. The lowering of the mound in 1969 was intended to “increase the batting” once again, as pitching

Portable Baseball Pitching Mounds for Sale | Indoor

To protect your baseball pitching mound during batting practice, we carry a line of batting practice platforms to protect your mound or sports facility floor during batting practice and preserve them for game-play. Available in both the Collegiate and ProModel sizes, our batting practice platforms are built to accommodate any level of play and

The influence of mound height on baseball movement and

Objectives: To determine whether mound height is associated with baseball movement (velocity, spin and break) and baseball pitching biomechanics (kinematics and kinetics). Design: Controlled laboratory study. Methods: Twenty collegiate baseball pitchers threw five fastballs and five curveballs from four different mound heights (15cm, 20cm, 25cm, 30cm) in a randomized order.

Pitching Mound Height? | TexAgs

Pitching Mound Height? 2,359 Views | 21 Replies | Last: 1 yr ago by ColoradoMooseHerd. Quito. You must be a subscriber to . Subscribe Now. Joined: Posts: 4,157 User Profile. Private Message. Ignore User Stop Ignoring

Amazon.com : 6 Inch Portable Youth Baseball Pitching Mound

The hinged section of the mound folds easily and weighs approximately 52 lbs. The mound is at regulation height of 6 inches for this age group and has the regulation slope requirement of 1 inch of drop for every 1 ft of length. Our mound also features a regulation youth sized pitching plate (18″ x 4″).

Study finds pitching mound height affects throwing motion

Study finds pitching mound height affects throwing motion, injury risk. A study involving several Major League Baseball pitchers indicates that the height of the pitcher’s mound can affect the

READ When did Darlene Zschech leave Hillsong?

8 Inch Tall Extra Wide Portable Pitching Mound – U Go Pro

8 Inch Tall Extra Wide Portable Pitching Mound. $ 729.00. Extra Wide 8″ Tall, 40″ Wide. $729 (Free Shipping) The second most popular portable pitching mound we have is 8″ tall, 40″ wide, and 96″ long when laid out. It is 40x32x17 when folded. Only the highest quality hardware with a real pitching rubber and bolt-on wheels are used to

Portable Pitching Mounds & Softball Pitching Mats

Game mounds can be used right on the skinned infield to give you the appropriate mound height for various levels of play. Beacon offers several portable baseball pitching mounds for sale, as well as pitching mats for softball. Contact our team of experts with any questions you have regarding practice mounds. Portable Pitching Mound Comparison

Distance From Pitcher's Mound to Home Plate in Little

The pitcher’s mound in the Major Division and younger age groups is located 46 feet from the home plate. Intermediate. The Intermediate (50/70) Baseball Division was introduced by Little League in 2010. Initially it was for players aged 12 and 13 but as of 2013 it is for players aged 11 to 13. The 50/70 in the division name actually refers to

After 1968's 'Year of the Pitcher,' MLB lowered the mound

Citing sources, ESPN reported that MLB “is interested in studying mound height, with the potential for [Commissioner Rob] Manfred to implement a lowering of the mound in 2020.”

Baseball Pitching Mound – H&K Sports Fields

Historical Baseball mound dimensions. A regulation pitcher’s mound is an 18 foot (5.5 m) circle, its center, 59 feet away from the back of the home plate. Commonly called the ‘pitching rubber’, the pitcher’s plate should be 18 inches (45.7 cm) behind dead center of the mound.

Is It Time to Move the Pitching Mound Back? – The Ringer

Fix that. — Joe Sheehan (@joe_sheehan) . The rationale for moving the mound back is simple: Modern pitchers are much taller and throw far harder than 19th-century pitchers. Thus

6-inch Mound – Beacon Athletics – Ballfields.com

6-inch Mound. We recommend the 6″ pitching mound as a 12′ diameter circle due to the size and stride of the pitchers throwing off this mound. This is different than the rule book recommendation of a 10′ diameter mound. The center is located 45′ from the apex of home plate along an invisible line from the apex through the center of 2nd base.

8" Tall Portable Pitching Mound Pro Model | YouGoProBaseball

The 8″ Tall Portable Pitching Mound is covered with 1/4 thick heavy-duty rubber mat instead of outdoor carpet that is used on standard mounds. Call or Text: 407-627-6997 [email protected] Facebook

The influence of mound height on baseball movement and

Therefore, the purpose of this study was to determine the effect of mound height (15 cm, 20 cm, 25 cm — standard, 30 cm) on baseball movement and pitching biomechanics for adult baseball pitchers. Three hypotheses were proposed, namely that mound height would affect the pitcher’s (1) ball movement (e.g., velocity, spin and break); (2) full

Top 10 Best Portable Pitching Mounds – Pitching Mound

The height of the portable pitching mound is the most important aspect to choosing the right pitching mound. We have had plenty of customers purchase a pitching mound, only to realize that they purchased the wrong height. So how do you determine what height mound you need? Mound height is most often determined by age group and field size.

Amazon.com: pitching mound

Players Choice Mounds 10″ Tall Adult Size Portable Pitching Mound for high School Age and Above. 4.2 out of 5 stars. 24. $525.00. $525. . 00. Get it Fri, May 13 – Wed, May 25.

MLB experimenting with moving back pitcher's mound as part

The Atlantic League, an eight-team independent partner league of Major League Baseball, will experiment with moving the pitcher’s mound back 12 inches in 2021, the leagues announced Wednesday.

Pitching Mound, Portable Pitching Mounds For Sale

The AllStar #4 game pitching mound is 90″ wide x 119″ long. It is 8″ high where the pitcher stands in front of the pitching rubber. The distance between the pitching rubber & the front of the mound is 80″, so even the tallest youth pitcher’s front foot should land on the mound and not in the dirt. The Allstar #4 youth pitching mounds

USSSA Pitching Rules – Texas Tournament BaseballTexas

7.05.A.1 A second (2nd) visit to the same pitcher in the same inning will cause this pitcher’s automatic removal from the pitching position; 7.05.A.2 The manager or a coach is prohibited from making a second (2nd) visit to the mound while the same batter is at bat, but. 7.05.A.3 If a pinch-hitter is substituted for this batter, the manager or

13U Travel Baseball Guide – Baseball Connections

Field and Equipment info: Regulations may vary by organization, but these are typical guidelines for 13U:. Pitching Mound Distance (feet): 54 or 60’6″ Distance between bases (feet): 80 or 90 Typical permitted bats: USSSA or USA or BBCOR Players typically use bats in this length range: 30-33 inches Typical bat “drops” (difference between length and weight): -5 progressing to -3 ounces

Tennessee Dixie Youth Baseball – Powered bySportsSignUp Play

2:01 “Pitching Circle” is a circle approximately twelve feet (12′) in diameter, around the center of the mound or pitcher’s slab. 2:02 “Coach-pitcher” is the offensive Coach who pitches to the players on his team. 2:03 “Player-pitcher” is the defensive player playing the pitching position, except he does not pitch to the batter.

Sizing up the the mystery of the mound at Tropicana Field

The mound slope is required to decline 1 inch per foot from 6 inches in front of the rubber to 6 feet in front of it. The Sox wanted to make sure the Rays mound met specs. Here’s a look at the

USSSA – United States Specialty Sports Association

7.04.E A dead ball appeal can be appealed directly to the umpire, without the Pitcher throwing to the appealed base. Only one dead ball appeal is allowed on any play. Coach Pitch Rule Update: 8.14 The batter shall receive a maximum of six (6) pitches or three (3) swinging strikes. (The bat is extended if the last pitch is hit foul)

Study finds pitching mound height affects thr | EurekAlert!

A study involving several Major League Baseball pitchers indicates that the height of the pitcher’s mound can affect the athlete’s throwing arm motion, which may lead to potential injuries because

Portolite Portable Pitching Mounds – Pitching Machine Sale

Their selection includes all the different height game pitching mounds including 6″, 8″, and 10″. They also carry practice mounds for both baseball and softball. Portolite offers it all! The Most Portable Mounds on the Market. If you are in the market for a portable pitching mound, chances are you need it to be portable.